Ideally, validation of targeted process control points can be simulated in a laboratory setting so appropriate Salmonella strains could be used for the evaluation.
processors have become increasingly aware of the need to control Salmonella during production due to the
risk of associated pet and human illness. Processors know how problematic
this pathogen can be but may not fully understand the scientific dynamics
surrounding effective elimination and potential for recontamination during
processing based on heat resistance and persistence in low-moisture products
such as petfood.
of Salmonella for petfood processors
requires a lethality, or “kill,” step as a critical point(s) during processing
to consistently support the production of Salmonella-free
products. Like other low-moisture food products, petfoods and treats require
special consideration in the development, validation and implementation of an
effective kill step based on the unique ability of Salmonella to resist thermal processing.
Salmonella can persist indefinitely
in a dehydrated state such that it remains viable and available for
recontamination of thermally processed, low-moisture food products and, thus, can
represent a food safety risk. Validation of processing steps used to reduce and
control Salmonella is necessary to
scientifically prove and ultimately demonstrate that a process is effective.
Like other low-moisture food products, petfoods and treats require special consideration in developing and validating an effective kill step based on the unique ability of Salmonella to resist thermal processing.
activities and supportive records that demonstrate the process is consistently performing
according to the established parameters are also key to ensuring the validated
process has been properly implemented and maintained. This may include
equipment calibration and performance records as well as product performance
data possibly comprised of both chemical and microbiological data of raw
materials as well as in-process and finished products.
studies must also be designed to encompass the entire process being used to
prevent, reduce and control recontamination of the finished product. Further, use
of raw materials in the validation should represent those routinely used to
best assess process performance and therefore adequately validate actual
of a process should be determined considering the worst case scenario, using a Salmonella serotype with the greatest
level of resistance and handling conditions that would be representative of
those likely to occur during normal handling and distribution. Validation
conditions must be carefully developed, in particular for low-moisture food
on previous studies, it would be expected that thermal inactivation of Salmonella in low-moisture activity
matrices would not follow a linear pattern. It is crucial to identify process
authorities with knowledge and experience in conducting process validation
studies for similar matrices.
validation of targeted process control points could be simulated in a
laboratory setting so appropriate Salmonella
strains could be used for the evaluation. Unique processes or those not
adequately simulated may need to be validated using a surrogate microorganism
that would be expected to react similarly to Salmonella. Such a microorganism could be applied to test products
and subjected to the process in the facility without representing a food safety
is possible that a combination of laboratory data based on process simulation,
combined with in-process data generated using surrogate organisms as well as
process verification records (e.g., time/temperature and pressure) may be
required to adequately establish critical control points (CCPs) and associated
parameters. Ultimately, validated CCPs established for the entire process would
demonstrate control of Salmonella
well beyond the minimum expectation that complete inactivation occurs within a
more information on safety and establishing
critical control points, check out the article and HACCP checklist here.
about equipment, services and techniques for keeping your production line
contaminant free, click here.
Advances in extrusion, drying and cooling technology and products
Cost reduction can often be achieved through optimizing usage of gels and thickeners
Extrusion extravaganza 2010
Get even more online in our database of the latest equipment in all things extrusion, drying and cooling. Check out www.petfoodindustry.com/products.aspx and click "Equipment" or visit www.petfoodindustry.com/ExtrusionExtras.aspx for additional information on th
Smaller lobbying groups employed most often to fight for clients' interests
What you need to keep your manufacturing line clean, safe and contaminant-free
Safe, nutritious, tasty petfood requires careful handling and processing of raw meat ingredients
The new US food safety legislation will also affect regulation of petfood
Select cat and dog foods may contain aflatoxin
Spending bill passed in House, being considered by Senate
--- Thank you for your patience ----
If you have any issues logging in or any other need feel free to contact us.