
Minimally processed pet food has no formal regulatory definition yet, but consumer demand for the category shows no signs of slowing, according to Brian Streit, senior director of process, innovation and commercial at JBT Marel Wenger. Streit discussed market drivers, processing approaches and food safety considerations during the most recent Ask the Petfood Pro, “Beyond the buzzword: Understanding minimally processed pet food.".
Here are the top takeaways from the discussion.
1. A working definition centers on limited processing and pasteurization
Because no global definition exists, JBT Marel Wenger developed its own, Streit said.
“Minimally processed pet food to us is one that retains much of its original character, nutrient profile and composition of its ingredients through limited processing steps such as grinding, mixing, refrigeration, freezing, gentle cooking, drying, freeze-drying, etc.,” Streit said. He added that such processing avoids “extensive thermal, mechanical or chemical modification, but still achieves pasteurization, making the food safe and practical to feed.”
Streit said JBT Marel Wenger has discussed with the Association of American Feed Control Officials (AAFCO) how the company could support a regulatory definition, though he was not aware of a timeline. The European Pet Food Industry Federation (FEDIAF) is also exploring a definition, he said.
Consumers look for a natural-looking product, recognizable ingredients such as whole meats and grains, meat and organ meats listed first on the label, visible fruit and vegetable inclusions, and no byproducts or GMOs, Streit said.
2. Market data points to lasting demand
Streit said JBT Marel Wenger research projects a 17% compound annual growth rate in retail value for the category through 2030, with volume growth of 10% to 12% depending on product type.
“The market trends certainly are indicating that this is here to stay,” Streit said.
3. The finished product target dictates the processing path
Manufacturers should define the end product before selecting equipment, Streit said. He identified four main processing approaches in the category: steam cooked, air dried, fresh or gently cooked, and cold formed. Freeze-dried products represent another option.
“Identifying the finished product target first will then dictate what that processing architecture and technique will be to produce those products,” Streit said.
Streit said the industry is shifting from batch production, which characterized many early entry-level products, toward continuous production to meet growing demand, with benefits including higher throughput, lower energy and waste costs, and reduced labor costs.
4. Gentle cooking means precise control of fewer variables
Streit said processing intensity is defined by thermal energy, mechanical energy, pressure, time and moisture. Gentle cooking involves eliminating one or more of those inputs and tightly controlling the rest to reach pasteurization without overcooking.
“You can certainly overcook a product thermally as easily as you can mechanically or with high pressure,” Streit said.
While manufacturers are responsible for their own hazard analysis, Streit said JBT Marel Wenger uses 80 to 85 degrees Celsius (176 to 185 degrees Fahrenheit) as a rule of thumb for most of these products, validated with appropriate testing. Moisture content and formulation affect the time-temperature relationship needed, he said.
5. Food safety obligations do not change
“The obligations for food safety are certainly the same whether it’s minimally processed or a traditionally processed pet food,” Streit said.
A formal hazard analysis should cover raw materials, processing and downstream storage, Streit said. He recommended a five- to six-log reduction as a safety target and said manufacturers should look beyond Salmonella to E. coli, Listeria and other indicator organisms.
Streit said manufacturers should design facilities and processes on the assumption that incoming raw materials carry pathogens. “My approach when I was in industry is that all raw materials contain pathogens, and that’s how the process was structured,” Streit said.
Antimicrobials may be considered if a hazard analysis shows the heat treatment alone is insufficient, but Streit said several effective processes do not require them.
6. Lower mechanical energy may improve vitamin retention
All of the processes discussed can produce complete and balanced products, Streit said. Early JBT Marel Wenger research shows increased vitamin efficacy, which he attributed to lower or no mechanical energy input. The company is continuing research to determine whether ingredient selection, processing or both drive the result.
The processes also allow for high fresh meat inclusion. Streit said JBT Marel Wenger systems have run formulas with up to 95% meat, though manufacturers must weigh yield loss from moisture removal in dried formats.
“Sky’s the limit, almost,” Streit said.
7. High-pressure processing fits the category; extrusion is debatable
Streit called high-pressure processing an effective minimally processed method because it relies on a single precisely controlled parameter and eliminates most thermal and all mechanical inputs.
Whether extrusion qualifies is less clear, he said. Specialized systems that favor steam over mechanical energy improve nutrition and palatability, but some mechanical energy remains.
“I think that could be a highly debatable topic,” Streit said.
For dryers, Streit said equipment can be designed to a defined upper temperature limit, such as 105 degrees Celsius (221 degrees Fahrenheit), based on incoming and target moisture levels.
8. Let the ingredient panel and product back up claims
Streit urged manufacturers to ensure front-of-pack claims are substantiated by the ingredient declaration and the product’s appearance.
“The product is going to tell you as much as the rest of the bag, in my opinion,” Streit said.
He criticized what he called anti-marketing that overstates processing temperatures and pressures used by competitors, which he said misleads consumers. Streit said the industry should recognize that different processes suit different products.
“In a large global market," Streit said, "there’s space for all these different processes to be successful."
To see more Ask the Petfood Pro topics or sign up for future discussions, click here.

















