Create a free PetfoodIndustry account to continue reading

Research looks at extrusion temperature in petfood processing

With safety being a key focus for petfood manufacturers, especially reducing the potential for and number of incidences of Salmonella contamination, a recent article from All About Feed addresses extrusion temperature as a critical control point in petfood processing. According to Galen J. Rokey, process technology manager, and Doug Baldwin, director of business development, Wenger Manufacturing, a good petfood safety program provides many benefits, including: reduced risks, decreased waste and customer complaints, product traceability, lower product liability, transparency for consumers and brand value.

With safety being a key focus for petfood manufacturers, especially reducing the potential for and number of incidences of Salmonella contamination, a recent article from All About Feed addresses extrusion temperature as a critical control point in petfood processing. According to Galen J. Rokey, process technology manager, and Doug Baldwin, director of business development, Wenger Manufacturing, a good petfood safety program provides many benefits, including: reduced risks, decreased waste and customer complaints, product traceability, lower product liability, transparency for consumers and brand value.

As part of a comprehensive petfood safety program, extrusion temperature is often chosen as a critical control point since extrusion is the major thermal process used in 95 percent of all petfood production. A correlation between extrusion temperature and moisture and the destruction of pathogenic organisms in an inoculated petfood formula has been shown by recent studies.

The article notes that pilot plant studies are useful in determining expected decontamination with different substrates; resistance of different microbial species to destruction under the same extrusion conditions; and 
variations in potential for decontamination among various extruders. Necessary revalidation of conditions include presence of new pathogens, extreme contamination levels, severe recipe changes, process parameters outside of the critical control limits, and changes in storage or packaging. However, the question of how to treat retention time in extrusion thermal processing remains.